Yamaha MO6 Owner's Manual page 60

Editing a Voice
Storing/Saving the created Voice
Two steps are necessary in order to store (save) your Voice—storing the edited Voice to internal memory and saving the
stored voices to a USB storage device.
Store
Voice Edit
Keep in mind that edited Voice data is stored to internal User memory (Flash ROM) and is stored even when turning the
power off. As such it is not necessary to save the data to a USB storage device; however, you may want to save it to another
media for backup or organizational purposes, using the Save operation.
Storing the edited Voice as a User Voice to internal memory
[VOICE] [STORE]
After editing the Voice, press the [STORE]
1
button to enter the Voice Store mode.
Make sure to execute the Store operation before selecting
another Voice.
2
Select the destination Voice memory.
Select a User Bank ("USR1" or "USR2" when storing a
Normal Voice, "UDR" when storing a Drum Voice) and the
desired Voice number by using the data dial, [INC/YES]
and [DEC/NO] button.
Select a User Bank.
CAUTION
When you execute the Store operation, the settings for the destination
memory will be overwritten. Important data should always be backed
up to a separate USB storage device.
60 Owner's Manual
Internal memory (Flash ROM)
User Normal Voice 001
User Normal Voice 002
User Normal Voice 003
User Normal Voice Bank 1
User Normal Voice 128
User Normal Voice 128
Select a Voice number.
User Drum Voice 001
User Drum Voice 002
User Drum Voice 003
Save
User Drum Voice Bank
User Drum Voice 32
3
Press the [ENTER] button.
The display prompts you for confirmation. Press the [DEC/
NO] button to cancel the Store operation.
DEC NO
EXIT
USB storage
device
INC YES
ENTER
EXECUTE