Yamaha MO6 Owner's Manual page 84

Creating a Pattern
3
Select a track, then adjust the Groove settings.
1 2
Select a track.
ELEMENT PERF. PART ZONE
9 10
Set each
parameter.
Move the cursor...
DEC/NO
EXIT
Play the Pattern
SEQ TRANSPORT
to check the
result of the
Groove settings.
LOCATE 1
REC
n
You can also edit the Groove parameters in real time during playback.
CAUTION
The created Song and Pattern data resides temporarily in DRAM (page 150). Because data contained in DRAM is lost when the power is turned off, you
should always store any data residing in DRAM to a USB storage device before turning off the power.
TIP Using the Groove settings to change the Pattern data
Grid Groove is a playback-only feature that processes the recorded data of a Pattern without actually changing it. In
other words, the original data (created via the Recording, File Loading and Patch functions) remains intact. If you want
to make the Grid Groove settings permanent and change the data, use Normalize Play Effect in the Pattern Jobs
([PATTERN] [JOB]
according to the Groove settings, and press the [ENTER] button to execute.
Creating a Pattern Chain
Each Pattern consists of 16 Sections (A – P) which can be used as Pattern variations. Create the desired rhythm Pattern
variations, or Sections, that you wish to use as accompaniment and backing for your new Song, according to the instructions
in the previous sections. After you've created the Sections, you can string these Sections together in any order desired to
assemble the backing part of the Song, over which you can record a melody line and any other parts, in the Song Record
mode.
n
Pattern Mixing, Groove, and Phrase Voice (Track Voice) on/off cannot be set independently for each Section, but apply to all Sections.
CAUTION
The same User Phrases can be assigned to different Sections within a pattern. Keep in mind, however, that the Section data will automatically be
changed if another Section sharing the same User Phrase is changed. For example, if you've assigned a certain User Phrase to both Section A and
Section D, and you change that User Phrase for Section A, the same Phrase will be changed for Section D as well.
84 Owner's Manual
3 4 5 6 7 8
11 12 13 14 15 16
SOLO
Set the value.
INC / YES
ENTER
DEC/NO INC / YES
EXECUTE
Grid
NOTE OFST (Note Offset)
2
CLOCK SFT (Clock Shift)
GATE OFST (Gate time Offset)
VELO OFST (Velocity Offset)
[F5] TRACK 04: Normalize Play Effect). From this display, specify the track to be changed
Pattern Chain
.....Enter the desired Sections for the Song
Section A Section B
TRACK
SELECT
MUTE
Move the cursor to the desired
parameter and grid point and set
the offset value.
Raises or lowers the pitch of the note(s) on the selected grid in semitones.
Shifts the timing of the note(s) on the selected grid forward or backward
in clock increments.
Lengthens or shortens the note(s) on the selected grid in clock
increments.
Increases or decreases the velocity of the note(s) on the selected grid.
Section F Section H
Convert
Song
– +
0
NOTE OFST
CLOCK SFT
GATE OFST
VELO OFST
........