Yamaha MO6 Owner's Manual page 120

Using the MO with computer software
Button/Controller names
on Mackie Control
SEND mode [DYN] (SELECTED CHANNEL only)
Knobs 1 – 8 For editing parameters.
PLUG-IN mode [PLUG-IN] (SELECTED CHANNEL only)
Knob 1 Changes the Slot Number (on page 1 only).
Knob 2 Turns the Effects on or off (on page 1 only).
Knob 3 Selects an Effect Type (on page 1 only).
Knobs 1 – 8 (turning) Edits each of the parameters (on page 2 and later).
SEND EFFECT mode [SENDS]/MASTER EFFECT mode [MASTER] (Global mode only)
Knob 1 Changes the Slot Number (on page 1 only).
Knob 2 Turns the Effects on or off (on page 1 only).
Knobs 1 – 8 Edits each of the parameters (on page 2 and later).
INSTRUMENT mode [INSTRUMENTS] (Global mode only)
Knob 1 Changes the Slot Number (on page 1 only).
Knob 2 Turns the software tone generator on or off (on page 1 only).
Knobs 1 – 8 Edits each of the parameters (on page 2 and later).
Parameters to be edited differ depending on the assigned Effect and Software Tone Generator.
Additional operations other than those listed above are available. For details, refer to the relevant
documentation of Mackie Control.
When controlling SONAR 4:
Functions of Mackie Control assigned to [F1] – [F6] and [SF1]
– [SF5] buttons
ASSIGNMENT
SENDS
PAN/SEND
TRACKS
FADER BANKS
TONE
FLIP
CHANNEL-L
TRACKS/DIALOG/WINDOW
ARP FX
OK/ENTER
NEW AUDIO
TRACK
EQ
SAVE
PAN/SEND
F5
F1
TONE
TONE
JOG PRM
ARP FX MAKER
ARP FX
CURSOR-L
CURSOR-DWN
EQ
Button/Controller names
on Mackie Control
In all modes:
[EDIT] Assigns a parameter to a Knob by using the [CHANNEL] and
[BANK] buttons.
[CHANNEL </>] (Multi Changes a parameter to be edited via a Knob in order one by
channel) one when [EDIT] is turned on.
[BANK </>] (Multi channel) Changes the parameters to be edited via a Knob in groups of
eight when [EDIT] is turned on.
[CHANNEL </>] Changes an indicated parameter in order one by one when
(Selected channel) [EDIT] is turned on.
[BANK </>] (Selected Changes the indicated parameters in groups of eight when
channel) [EDIT] is turned on.
[NAME/VALUE] Changes the indication of the parameter name and its value.
[SEL] Selects a channel.
[MUTE] Mutes or unmutes each channel.
[M4]+[MUTE] Unmutes all channels.
[SOLO] Sets Solo for each channel to on or off.
[M4]+[SOLO] Sets Solo for all channels to off.
[REC RDY] Sets the REC RDY of each channel to on or off.
[M4]+[REC RDY] Sets the REC RDY of all channels to off.
[TRACK] Assigns a Track to a Fader.
120 Owner's Manual
Functions
PLUG-INS DYN DIAL RESET KN1-4/5-8
PAN EQ BANK-L BANK-R
EDIT NAME/VALUE DIAL RESET KN1-4/5-8
CHANNEL-R BANK-L BANK-R
CANCEL NEXT WINDOW CLOSE WINDOW KN1-4/5-8
NEW MIDI FIT TRACK FIT PROJECT
AUX MAIN DIAL RESET KN1-4/5-8
UNDO REDO BANK-L BANK-R
F6 F7 F8 KN1-4/5-8
F2 F3 F4
LOOP ON/OFF HOME DIAL RESET KN1-4/5-8
LOOP SELECT PUNCH
CURSOR-R SCRUB DIAL RESET KN1-4/5-8
CURSOR-UP ZOOM BANK-L BANK-R
Functions
Button/Controller names
on Mackie Control
[AUX]
[MAIN]
[BANK </>]
[CHANNEL </>]
[FLIP]
[FLIP] [FLIP]
[NEXT WINDOW]
[LOOP SW]
[F1] – [F8]
[CLOSE WINDOW]
[UNDO]
[REDO]
[SAVE]
[M1]+[MARKER]
[MARKER]
[RWD]
[M1]+[RWD]
[FF]
[M1]+[FF]
[STOP]
[PLAY]
M1
[REC]
[ZOOM]
[SCRUB]
M1
[JOG PRM]
TRACK mode [TRACKS] (Track Parameter mode)
[TRACKS] [TRACKS] (Selected Channel mode)
M1
Knobs 1 – 8 (turning)
Knobs 1 – 8 (pressing)
PAN mode [PAN]
M1
[PAN] [PAN] (Selected Channel mode of PAN/SURROUND)
Knobs 1 – 8 (turning)
Knobs 1 – 8 (pressing)
M1
SEND mode [SENDS]
[SENDS] [SENDS] (Selected Channel mode)
Knobs 1 – 8 (turning)
Knobs 1 – 8 (pressing)
M1
PLUG-IN mode [PLUG-IN]
[PLUG-IN] [PLUG-IN] (Selected Channel mode)
[M1]+[CHANNEL </>]
Knobs 1 – 8 (turning)
M1
Knobs 1 – 8 (pressing)
EQ Edit [EQ]
[EQ] [EQ] (Selected Channel mode)
(in the Selected Channel mode) [EQ] (Band mode)
[M1]+[CHANNEL </>]
Knobs 1 – 8 (Band mode)
Faders (Band mode)
The Song Position Bar may not synchronize with the actual playback position during Scrub
playback.
Parameters to be edited may differ depending on the assigned Effect and Software Tone
Generator.
Some parameters may not be available depending on the selected Effect Type.
Press the [DRUM KIT] button to indicate the Track/Slot/EQ/DYN number in the brackets [ ] at the
top of the LCD.
The [M2] – [M4] buttons on the Mackie Control correspond respectively to the [EDIT], [JOB], and
[STORE] buttons.
Additional operations other than those listed above are available. For details, refer to the relevant
documentation of Mackie Control.
You can find the Help window by selecting "Mackie Control" from the Tool Menu on SONAR and
pressing the [F1] button.
Please keep in mind that some functions may not be available.
Functions
Assigns an AUX BUS to a Fader.
Assigns output level adjustment of the Virtual Main Bus to the
Faders.
Scrolls through the track indication every eight channels.
Scrolls through the track indication channel-by-channel.
Assigns the functions of the Channel Knobs to the Faders.
Switches the functions of the Channel Knobs and the Faders.
Moves the next window to the front of the screen.
Sets Loop to on or off.
[F1] – [F8] as defined in SONAR.
Closes the current window.
Executes the Undo operation.
Executes the Redo operation.
Executes the Save operation.
Opens the window for entering the Marker to the current song
position.
Turns the Marker on or off.
Press briefly to move back one measure at a time, or hold to
continuously rewind.
When the Marker is turned on, this operation moves the song
position to the previous Marker.
Moves the song position to the top of the song. When the
Marker is turned on, this operation opens the window for
entering the Marker.
Press briefly to move forward one measure at a time, or hold
to continuously fast-forward.
When the Marker is turned on, this operation moves the song
position to the next Marker.
Moves the song position to the end of the song. When the
Marker is turned on, this operation opens the window for
entering the Marker.
Stops recording or playback.
Press to start playback from the current point.
Press this to start song recording. The [F] (Play) and [REC]
lamp are turned on during recording.
Turns Zoom on and off.
Turns Scrub on and off. When Scrub is on, the dial can be
used for Scrub playback. When Scrub is off, the dial is used
to move the song position.
Turns Data Entry on and off. When turned on (the lamp lights),
rotating the dial has the Data Entry function.
For editing parameters. (The LCD indication may not be
updated.)
Resets the parameter value to its default.
For editing parameters.
Resets the parameter value to its default.
For editing parameters.
Resets the parameter value to its default.
Changes the Plug-in number when the [EDIT] is turned on.
For editing parameters.
Resets the parameter value to its default.
Changes the EQ number when the [EDIT] is turned on.
For editing each frequency band.
For editing the gain of each Band.