Yamaha MO6 Owner's Manual page 61

To execute the Store operation, press the
4
[INC/YES] button.
After the Voice has been stored, a "Completed" message
appears and operation returns to the Voice Play display.
DEC NO
EXIT
CAUTION
Never attempt to turn off the power while an "Executing..." or "Please
keep power on" message is shown. Turning the power off in this state
may cause the system to freeze and prevent normal startup the next
time the power is turned on, as well as resulting in the loss of all user
data.
CAUTION
If you select another Voice without storing, the currently edited Voice
will be lost. Make sure to store the edited Voice before selecting another
Voice.
Saving the edited Voices to a USB
storage device
[FILE] [F2] SAVE
Connect the USB device and follow the instructions below.
n
When a USB storage device is connected or media is inserted, an
error message "USB device unformatted." may appear in the LCD
display, indicating that the device must be formatted for use in the
File mode (page 211).
Press the [FILE] button to enter the File mode.
1
Then press the [F1] CONFIG button and [SF1]
CURRENT button.
If the device is divided into several partitions, select the
specific partition for use. If the device has several media
(e.g., discs) inserted, select a specific Slot number.
Press the [F2] SAVE button to call up the Save
2
display.
INC YES
ENTER
EXECUTE
3
Set the Type parameter to "All Voice."
The following three file types are available for saving Voice
data. Here, select "All Voice."
When this is selected, execute the Save operation to
All
save all the created data including the User Voices as
a single file (extension: M7A).
When this is selected, execute the Save operation to
All Voice
save all User Voices as a single file (extension: W7V).
When this is selected, execute the Save operation to
Voice Editor
save all User Voices as a single file (extension: W7E)
which can be exported to the Voice Editor software.
4
Input a file name.
Move the cursor to the file name field, then input the
desired file name. For detailed instructions on naming a
Voice, refer to page 38.
File name
If you have created a destination folder, select
5
the folder.
For information on how to select a folder, see page 213. For
information on how to create/delete a folder and change
the folder name, see page 211.
Press the [SF1] EXEC button to actually save
6
the file.
If you are about to overwrite an existing file, the display
prompts you for confirmation. Press the [INC/YES] button
to execute the Save operation to overwrite the existing file,
or press the [DEC/NO] button to cancel it.
CAUTION
While the data is being saved/loaded, make sure to follow these
precautions:
• Do not remove or eject the media from the USB storage device.
• Do not unplug or disconnect the USB storage device.
• Do not turn off the power of the instrument or the relevant devices.
Editing a Voice
Owner's Manual 61