Using the Controllers—Advanced Course
Controllers supported by the MO
You can control tone, volume, pitch and other parameters by using the controllers on the front panel, as well as by using
external controllers connected to several controller jacks on the rear panel.
Controllers on the front panel
Pitch Bend Wheel
Modulation Wheel
STANDBY
ON
MO rear panel
Controllers on the MO
Pitch Bend wheel/Modulation wheel
These control pitch and vibrato. For details, see page 50.
Knobs and Control sliders
These control various parameters. For details, see page 51.
Controllers (optional) that can be connected to the rear panel of the MO
Footswitch
An optional Yamaha FC4 or FC5 Foot Switch connected to the rear panel FOOT SWITCH jack can be assigned to a range of
parameters. It is suited for switch-type (on/off) controls, such as sustain, Portamento Switch, increment/decrement of a Voice
or Performance Number, starting/stopping the Sequencer, and holding the Arpeggio on or off.
Foot Controller
An optional Foot Controller (such as the FC7), connected to the FOOT CONTROLLER jack on the rear panel, can be
assigned to control a variety of parameters on the instrument. By using a foot controller for parameter control in this way,
both your hands are left free to play the keyboard (or to operate other controllers)—an exceptional convenience when
playing live.
Knobs
Control sliders
MASTER
ZONE 1
ZONE 2
ZONE 3
ZONE 4
VOLUME
DC IN
TO DEVICE
TO HOST
USB
FOOT
SWITCH
MIDI
FOOT
FOOT
DIGITAL OUT
OUTPUT
PHONES
SWITCH
CONTROLLER
THRU
OUT
IN
R
L MONO
Optional Controllers
FC4 or FC5
Controllers supported by the MO
FOOT
CONTROLLER
FC7
Owner's Manual
69