Yamaha MO6 Owner's Manual page 163

FCenterKey
Level Sensitivity and Center Key
When Level Sensitivity is set to 100
Amount of AEG
level change
Lower
range
[SF5] SCALE
(Amplitude Scaling)
[F5] LFO (Low Frequency Oscillator)
This display gives you a comprehensive set of controls over the LFO for each individual Element. The LFO can be used to create vibrato, wah, tremolo and
other special effects, by applying it to the pitch, filter and amplitude parameters.
Wave
Speed
KeyOnReset
KeyOnDelay
PMod
(Pitch Modulation Depth)
FMod
(Filter Modulation Depth)
AMod
(Amplitude Modulation Depth)
FadeInTime
Determines the central note or pitch for the Key Follow effect on Amplitude EG. Depending on the EG Time
Sensitivity parameter above, the further away from the Center Key the keys are played, the more the time of the
Amplitude EG deviates from the norm.
When the Center Key is played, the AEG behaves according to its actual settings. The amplitude change
characteristics for other notes will vary in proportion to the EGTime settings.
Settings: C -2 – G8
n
You can also set the Center Key directly from the keyboard, by holding down the [INFORMATION] button and pressing
the desired key.
Positive value
Large
Negative value
+
Small
–
Center key Higher
range
Amplitude Scaling controls the output level (set in the [F4] AMP í [SF1] LVL /PAN display) according to the
positions of the notes on the keyboard. You can divide the entire keyboard by four break points, and assign
different offset values of amplitude to them respectively. Refer to the setting example on page 169.
Settings: BREAK POINT 1 – 4: C-2 – G8
Settings: OFFSET 1 – 4: -128 – 0 – +127
n
You can also set the Break Point directly from the Keyboard, by holding down the [INFORMATION] button and pressing
the desired key.
Determines the LFO waveform used to vary the sound.
Settings: saw, tri, squ
saw (sawtooth wave)
Determines the speed of the LFO waveform. The higher the value, the faster the speed.
Settings: 0 – 63
Determines whether or not the LFO is reset each time a note is played.
Settings: off, on
Off
Time
Key on
Determines the delay time between the moment you play a note on the keyboard and the moment the LFO
comes into effect. A higher value results in a longer delay time.
Settings: 0 – 127
Determines the amount (depth) by which the LFO waveform varies (modulates) the pitch of the sound.
The higher the value, the greater the amount of pitch modulation.
Settings: 0 – 127
Determines the amount (depth) by which the LFO waveform varies (modulates) the Filter Cutoff frequency. The
higher the value, the greater the amount of filter modulation.
Settings: 0 – 127
Determines the amount (depth) by which the LFO waveform varies (modulates) the amplitude or volume of the
sound. The higher the value, the greater the amount of amplitude modulation.
Settings: 0 – 127
Determines the amount of time for the LFO effect to fade in (after the KeyOnDelay time has elapsed).
A higher value results in a slower fade-in.
Settings: 0 – 127
Voice Edit mode Normal Voice Edit
EG Time Sensitivity and Center Key
Faster speed
+63
+30
Lower range Higher range
-40
Slower speed
Center key
tri (triangle wave)
On
Time
Key on
Element Edit
squ (square wave)
Owner's Manual
163