Editing a Performance
The Performance Edit mode ([PERFORM]
different Parts (Voices)—by editing the various parameters. After assigning different Voices to separate ranges of the
keyboard, edit the detailed parameters in the Performance Edit mode.
Press the [PERFORM] button to enter the Performance mode, then select a Performance to be edited
1
(page 44).
2
Press the [EDIT] button to enter the Performance Edit mode.
3
Call up the Common Edit display or Part Edit display.
Use Part Edit to edit the parameters for each Part.
Use Common Edit to edit the parameters for all of the Parts.
While in the Voice Edit mode, you can switch between
the Common Edit display and the Part Edit display as
shown below.
Calling up the Common Edit display
Press the [COMMON] button to call up the
Common Edit display.
In the Edit mode, the [DRUM KITS] button
functions as the [COMMON] button.
Indicates a Common Edit display.
[EDIT]) lets you create your own original Performances—containing up to four
DRUM
KITS
PRE 1
FAVORITES
A. PIANO
A
SYN LEAD
1
COMMON
9
Common Edit
PRE 2
PRE 3
PRE 4
Calling up the Part Edit display
Press the desired Part number from the PERF.
KEYBOARD
ORGAN
GUITAR
PART [1] – [4] buttons to call up the Part Edit
PLUCKED
display.
B
C
D
CHROMATIC
SYN PAD
SYN COMP
PERCUSSION
CHOIR
2
3
4
ELEMENT PERF. PART ZONE
10
11
12
You can select the four Performance Parts.
Editing a Performance
Indicates the display for editing Part 1.
Part 1 Edit
Part 2 Edit
Part 3 Edit
Part 4 Edit
Owner's Manual
63