Cisco Headset 530 Series - Cisco Headset 500 Series User Manual

Cisco Headset 530 Series

Figure 1: Cisco Headset 520 Series Controller
The following table describes the Cisco Headset 521 and 522 controller buttons.
Table 1: Cisco Headset 520 Series Controller Buttons
Number
1
2
3
Cisco Headset 530 Series
The Cisco Headset 531 and 532 are two wired headsets that have been developed for use on Cisco IP Phones
and other call devices. The Cisco Headset 531 features a single earpiece for extended wear and comfort. The
Cisco Headset 532 features two earpieces for use in a noisy workplace.
Both headsets feature an RJ9 connector for use on most Cisco IP Phones. With the RJ9 connector, the headset
works like other headsets that plug into the headset port on the phone.
An inline USB adapter is also available with a built-in controller that provides easy access to call
control capabilities, including answer, end call, reject call, hold and resume, mute, and volume control. You
can use the quick disconnect on the USB controller cable to move your headset from one device to another.
Cisco Headset 500 Series User Guide
2
Name Description
Mute button Toggle the microphone on and off.
Volume button Adjust the volume on your headset.
Call Manage calls:
• Press once to place a call (Cisco IP Phone only)
• Press once to answer an incoming call.
• Press and hold to end a call.
• Press twice to reject an incoming call.
• Press once to put an active call on hold. Press again to retrieve
a call from hold.
Your Headset