Cisco Headset 500 Series User Manual page 11

Your Headset
The inline controller is also available with a USB-C connector.
You can connect a second headset to the Cisco Headset 530 Series with the Cisco Headset 530 Series Y
Trainer Cable. See
information.
See the
devices and call clients.
Your adapter is used for basic call features.
Figure 2: Cisco Headset 530 Series Controller
The following table describes the Cisco Headset USB Adapter buttons.
Table 2: Cisco USB Adapter Buttons
Number
1
2
3
Connect and Use the Cisco Headset 530 Series Y Trainer Cable, on page 4
Cisco Headset 500 Series Data Sheet
Name
Mute button
Volume button
Call button
for complete information on compatibility with other Cisco
Description
Toggle the microphone on and off.
Adjust the volume on your headset.
Place, answer, and manage your calls:
• Press once to place a call. (Cisco IP Phone only)
• Press once to answer an incoming call.
• Press twice to reject an incoming call.
• Press once to put an active call on hold.
• Press and hold to end a call.
Cisco Headset 500 Series User Guide
Cisco Headset 530 Series
for more
3