Deploy The Cisco Headset 700 Series On Cisco Ip Phone 8800 Series - Cisco 700 Series Administration Manual

Hide thumbs Also See for 700 Series:

Table of Contents

About the Cisco Headset 700 Series

Step 2

Enable Bluetooth on the intended call device.

You can enable and disable Bluetooth from the Settings menu on most call devices.

Step 3

Select your headset from the device list.

The headset will appear in the device list as Cisco HS 730 followed by the last three digits of the headset

serial number.

Deploy the Cisco Headset 700 Series on Cisco IP Phone 8800

Series

The Cisco Headset 730 can connect to these Cisco IP Phones with the included USB cable:

Note

Phone firmware 12.7(1) or later is required to support the Cisco Headset 730.

• Cisco IP Phone 8851

• Cisco IP Phone 8851NR

• Cisco IP Phone 8861

• Cisco IP Phone 8865

• Cisco IP Phone 8865NR

Procedure

Step 1

Connect the USB-C end of the USB cable into the port on the bottom of the left ear cup.

Step 2

Connect the USB-A end of the cable into a USB port on the Cisco IP Phone.

Deploy the Cisco Headset 700 Series on Cisco IP Phone 8800 Series

Cisco Headset 700 Series Administration Guide

Table of Contents

730 series