Cisco Headset 500 Series User Manual page 39

Headset Settings
Step 5
Press the Navigation cluster, left or right, to adjust the gain.
Step 6 Press Save to apply your setting.
Test Your Microphone (USB Only)
You can test your microphone to hear how you sound through your headset when you use a USB connection.
Procedure
Step 1
Press Applications
Step 2 Select Status > Accessories.
Step 3
Highlight Cisco Headset and press Setup.
Step 4 Select Microphone > Test.
Step 5
Press Record and speak into the microphone.
Step 6 Press Play when you finish speaking and listen to the test recording. The maximum recording time is 20
seconds.
Webex DX Headset Customization
Change Audio Sources on Your Webex DX
Your DX device can connect to multiple audio devices.
Procedure
Step 1
Select the icon in the upper right corner of your DX device and choose from the available audio devices. The
icon in the status bar displays which audio output your DX is currently using.
Step 2 Select Cisco Headset.
Jabber Headset Customization
Change the Audio Device in Cisco Jabber for Windows
You can specify which audio device you wish to use in Cisco Jabber for Windows.
.
Test Your Microphone (USB Only)
Cisco Headset 500 Series User Guide
31