Manage Your Bluetooth Connections In The Cisco Headsets App; Use The Cisco Headset Usb Hd Adapter - Cisco Headset 730 User Manual

Manage Your Bluetooth Connections in the Cisco Headsets App

Light Status
Blinks blue
Manage Your Bluetooth Connections in the Cisco Headsets App
You can use the Cisco Headsets mobile app to manage your headset Bluetooth connections. Your headset can
save up to eight Bluetooth devices and maintain an active connection with two at the same time.
Procedure
Step 1 On your mobile device, open the Cisco Headsets app.
Step 2
Tap Connected to at the bottom of the home screen.
Step 3 Select the device you wish to connect or disconnect.

Use the Cisco Headset USB HD Adapter

Your Cisco Headset 730 comes with a USB adapter for use with call devices that don't have a Bluetooth
option. The USB HD Adapter comes out of the box pre-paired to your headset. The adapter automatically
connects to your headset when it plugs into a powered USB port.
When you want to disconnect your headset, simply unplug the adapter from the call device. It takes about 10
minutes for your headset to accept another active Bluetooth connection after you disconnect the USB HD
Adapter. You can also turn off your headset then on again to pair a new device quickly.
Note
You can't install firmware updates to your headset through the USB HD Adapter.
Procedure
Step 1
Plug in your USB HD Adapter to your preferred device.
Step 2 Turn on your Cisco Headset 730.
Step 3
Select Cisco HS USB Adapter from your Bluetooth device list.
Cisco Headset 730 User Guide
6
System State
Headset in Pairing Mode
Your Headset