Unpair A Guest Headset; Change The Primary Paired Headset; Unpair Your Primary Headset From Your Base - Cisco Headset 500 Series User Manual

Your Headset
Step 3 Optional: Press the Mute

Unpair a Guest Headset

You can unpair guest headsets from the primary base.
Procedure
Do one of these actions.
• Press and hold Call
• Place the primary headset on the base. All guest headsets will disconnect.

Change the Primary Paired Headset

You can change the primary headset on your standard base or multibase. When the new headset pairs, the
previous primary headset plays a tone and unpairs from the base.
Procedure
Step 1
On the new headset, hold Mute
Step 2 Place the new headset on the base.
Note

Unpair Your Primary Headset From Your Base

You can designate a new primary headset and force the old headset to unpair from your base. This is useful
in case you can't locate the primary headset and turn it off.
on the guest headset to join the conversation.
on the guest headset until you hear a tone.
for five seconds until the headset LED rapidly alternates red and white.
You can skip step one if you power cycle the base with the new headset seated in the cradle.

Unpair a Guest Headset

Cisco Headset 500 Series User Guide
15