Cisco Headset 500 Series User Manual page 31

Cisco Headset 500 Series Call Controls
Step 3
Press Call.
End a Call and Answer an Incoming Call
Procedure
Step 1 Hold Call
Step 2 Press Call once.
End a Call and Resume a Held Call
Procedure
Step 1
Hold Call
Step 2 Select the call that you want to resume.
Step 3
Press Call once.
Cisco Headset 560 Series Call Controls
Cisco Headset 561 and 562 with Standard Base and Cisco Headset 561 and 562 with Multibase use similar
call controls to the wired headset models with a few important differences. The call control buttons are located
on the headset ear cup and call status feedback is provided on the Standard Base and Multibase.
Related Topics
Turn Your Headset On and Off
Procedure
Step 1 Hold Call
Step 2
Do one of these actions.
• Hold Call
• Place the headset on the base.
until you hear a tone.
until you hear a tone.
Cisco Headset 560 Series, on page 4
on your headset for 4 seconds. You hear a tone indicating headset status.
for 1 second to turn the headset back on.
End a Call and Answer an Incoming Call
Cisco Headset 500 Series User Guide
23