Cisco Explorer Series Staging Manual page 84

Digital home communications terminal
Table of Contents

Advertisement

Chapter 6 How to Stage DHCTs
Results:
The Entitlement Agent displays ISE (1) 0X000000001
The Sub Expire date is set to 30 days from today
IPPV / VOD / xOD sites are activated (only if you are using them)
IPPV cells are not 0 (zero; only if you are using IPPV)
VOD cells are not 0 (zero; only if you are using VOD)
8
Do the pages display all of the items shown in the results of the preceding step?
If yes, go to step 9.
If no, send an instant hit to that DHCT using one of the following methods:
9
Did the instant hit increase the EMM count to the required number?
If yes, you are finished with this procedure.
If no, go to DHCT EMM Count Errors (on page 95) for more information.
74
Using the billing system. The billing system has been set up to send the
DhctInstantHit command to DHCTs. Refer to your billing system
documentation for instructions and specific information.
Using the DNCS. See Sending an Instant Hit to a DHCT (on page 99) for
more information.
734375 Rev H

Advertisement

Table of Contents
loading

This manual is also suitable for:

Explorer 2100Explorer 3100Cablecard

Table of Contents