Table of Contents
Advertisement
Appendix D
Adding an HDD Test Server to the BFS
Placing the HDD Performance Specification File on
the HDD Test Server
Note: This procedure can be used for systems that support multiple or single sites.
1
In the Broadcast File Server List window, double-click the hddtest server. The
hddtest server opens to show its contents.
2
Click File > New File. The Set Up File window opens.
3
Follow these instructions to enter data into the fields of the Set Up File window:
Click in the File Name field and type testparam.cfg.
Click the Source Name arrow and select Out of Band.
Click in the File Path field and type /dvs/resapp/Tools/testparam.cfg.
Result: The Set Up File window is configured as shown in the following
example.
4
Click Save to save your changes and close the Set Up File window. The HDD
Performance Specification file is placed on the HDD Test server. As a result, the
testparam.cfg file appears beneath the open hddtest server.
5
Click File > Close to close the Broadcast File Serve List window. You have
successfully set up the BFS to support the HDD Test.
156
734375 Rev H
Advertisement
Table of Contents
