Table of Contents
Advertisement
Chapter 9 Troubleshooting
DHCTs With Only POWER LED Indicators
DHCTs with only POWER LED indicators display the codes associated with
downloading, installing, and booting into the SARA as a series of flashing lights
using the POWER LED indicator light on the front panel.
Note: You must stage DHCTs with only POWER LED indicators using the CVT
download method.
The information conveyed by the POWER LED indicator is discussed in the
following sections of this document:
DHCT Errors (on page 95)—Displays several errors that might occur during
staging of the DHCT
LED Indicators Displayed During a CVT Download (on page 116)—Displays the
POWER LED indicators during the CVT download
POWER LED Indicators Displayed on DHCTs (on page 125)—Displays the
POWER LED error indicators if the CVT download fails
100
734375 Rev H
Advertisement
Table of Contents
