Table of Contents
Advertisement
Designating an Existing Hub as a Staging Bridge
The procedures in this section describe how to designate an existing hub (QPSK or
CMTS) as a staging bridge.
Designating an Existing QPSK as a Staging Bridge
Follow this procedure to designate an existing QPSK as a staging bridge.
1
From the DNCS Administrative Console, click the Network Element
Provisioning tab.
2
Click QPSK/CMTS. The QPSK/CMTS list panel displays.
3
Locate the QPSK modulator you want to designate as a staging bridge in the
QPSK/CMTS list.
4
Double-click the name of the QPSK modulator.
5
In Options, select the Staging Bridge check box.
6
Click Save. The DNCS will use this QPSK modulator as a staging bridge.
Designating an Existing CMTS as a Staging Bridge
Follow this procedure to designate an existing CMTS as a staging bridge.
1
From the DNCS Administrative Console, click the Network Element
Provisioning tab.
2
Click QPSK/CMTS. The QPSK/CMTS list panel displays.
3
Locate the CMTS you want to designate as a staging bridge in the QPSK/CMTS
list.
4
Double-click the name of the CMTS.
5
In Options, select the Staging Bridge check box.
6
Click Save. The DNCS will use this CMTS as a staging bridge.
734375 Rev H
Set Up Staging Bridges
163
Advertisement
Table of Contents
