Table of Contents
Advertisement
Appendix D
Adding an HDD Test Server to the BFS
Adding an HDD Test Server to the BFS
Note: This procedure can be used for systems that support multiple sites (RCS-
enabled) or single sites.
1
On the DNCS Administrative Console, select the Application Interface Modules
tab.
2
Click BFS Admin. Choose one of the following options:
For single-site systems, the Site DNCS BFS Administration window opens.
Click File > All Sites.
For multiple-site (RCS-enabled) systems, the Please Select a Site window
opens.
3
Select the Servers tab.
4
Click File > New. The Authorize BFS Server window opens.
5
Enter the following data into the fields of the Authorize BFS Server window:
In the Server Name field, enter hddtest.
From the Available Sources list, select Out of Band.
Click Add.
Result: The Authorize BFS Server window is configured as shown in the
following example.
150
734375 Rev H
Advertisement
Table of Contents
