Table of Contents
Advertisement
Chapter 3 Optimize Your System Performance for Downloads and Staging
9
Click Image. The Image List window opens.
10 Click the Downloadable Files tab.
11 Highlight a software file that is unused in the network, click File > Delete.
Notes:
The DHCT software files have file extensions of .rom (for 4250-series DHCTs)
or .disk (for 8300-series DHCTs).
If a download is associated to a group, the operator should delete the
download on the DHCT Downloads tab, then delete the image from the
Download Files tab.
12 Repeat step 11 for each file that is unused in the network until all unused
software files are deleted.
Clean Up the ResApp Directory
This section provides instructions to clean up the resapp directory.
Important: This procedure is optional, but we recommend that you clean up the
directory. The fewer files that are in the directory, the easier the remaining
installation procedures. Refer to How Do I Manage the Files on My System? (on
page 22) for more information.
Cleaning Up the ResApp Directory
1
Open an xterm window on the DNCS.
2
Log on to the DNCS as root.
3
Type cd /dvs/resapp and press Enter.
Note: Be sure to type a space between cd and /.
4
Type ls and press Enter.
5
Delete the software files for the previous versions of software.
Example: Type rm *1.52* and press Enter.
Important: The CVT download process makes copies of the files currently in use;
therefore, deleting files from this directory has no system impact.
6
Go to Verify the Download Directory (on page 33).
32
734375 Rev H
Advertisement
Table of Contents
