734375 Rev H
D
Appx auto letter
Appendix D
Adding an HDD Test Server to
the BFS
Introduction
This appendix includes the tasks required to set up the BFS to support
the HDD test.
Important Note for Multiple-Site (RCS-Enabled) Systems: Manually
setting up any BFS server or source must be done for the "AllSites" site
only and not for any other individual sites in your system. Otherwise,
the server and source will fail.
For more information on the HDD test, refer to the DVR Configuration
Guide (part number 4011411).
In This Appendix
Overview .............................................................................................. 148
Test Server ............................................................................................ 156
147