Cisco Catalyst 6500 Series Installation Manual page 89

Chapter 1 Product Overview
Figure 1-43 Firewall Services Module (WS-SVC-FWM-1-K9)
WS-SVC-FWM-1
FIREWALL SERVICES MODULE
STATUS LED
78-15725-02
The front panel LEDs are shown in
Table 1-14 Firewall Services Module STATUS LED Description
Color/State Description
Green All diagnostic tests pass. The module is
operational.
Red A diagnostic test other than an individual port test
failed.
Orange Indicates one of three conditions:
Off The firewall module power is off.
The SHUTDOWN button is used to manually shut down the Firewall Services
Module. To prevent corruption of the module, it is critical that the module run
through the shutdown procedure before shutting off. If the module fails to respond
to CLI or NAM shutdown commands, you can use the SHUTDOWN button as an
alternative shutdown method.
For further information on the Firewall Services Module, refer to the
Catalyst 6500 Series Firewall Services Module Installation and Configuration
Note.
Firewall Services Module (WS-SVC-FWM-1-K9)
Figure 1-43
SHUTDOWN button
The module is running through its boot and
•
self-test diagnostic sequence.
The module is disabled.
•
The module is in the shutdown state.
•
Catalyst 6500 Series Switch Module Installation Guide
and described in Table
SHUTDOWN
1-14.
1-65