Cisco Catalyst 6500 Series Installation Manual page 102

Voice-Related Modules
Table 1-19 CMM STATUS LED
Color/State
Off
Red
Orange
Green
1. Enter the show environment temperature mod command to display the temperature of each of
Catalyst 6500 Series Switch Module Installation Guide
1-78
Description
The module is waiting for the supervisor engine to turn
•
on power.
The module is not online.
•
The module is not receiving power, which could be
•
caused by the following:
The module is released from reset by the supervisor
•
engine and is booting.
If the boot code fails to execute, the LED stays red
•
after power up.
• The module is initializing hardware or communicating
with the supervisor engine.
• A fault occurred during the initialization sequence.
If the module fails to download its Field
•
Programmable Gate Arrays (FPGAs) on power up, it
continues initializing and is granted module online
status from the supervisor engine, but the LED stays
orange.
If the module is not granted module online status from
•
the supervisor engine, the LED stays orange. This
problem could be caused by the supervisor engine
detecting a failure in an external loopback test that it
issued to the module.
The module is operational; the supervisor engine has
•
granted module online status.
four sensors on the module.
Power is not available to the module.
–
Module temperature is over the limit
–
Chapter 1 Product Overview
1
.
78-15725-02