Cisco Catalyst 6500 Series Installation Manual page 174

Supervisor Engine Console Port Signals and Pinouts
Modem Adapter
Catalyst 6500 Series Switch Module Installation Guide
B-12
Table B-6 Port Mode 1: Console Port Signaling and Pinouts
(DB-25 Adapter) (continued)
Console Port RJ-45-to-RJ-45 Rollover Cable
Signal RJ-45 Pin
GND 5
RxD 6
DSR 7
1
CTS 8
1. Pin 1 is connected internally to Pin 8.
Use the RJ-45-to-RJ-45 rollover cable and RJ-45-to-DB-25 male DCE adapter
(labeled "Modem") to connect the console port to a modem.
pinouts for the asynchronous serial auxiliary port, the RJ-45-to-RJ-45 rollover
cable, and the RJ-45-to-DB-25 male DCE adapter.
Appendix B Cable and Connector Specifications
RJ-45-to-DB-25
Terminal
Adapter
RJ-45 Pin DB-25 Pin
4 7
3 2
3 20
1 4
Console
Device
Signal
GND
TxD
DTR
RTS
Table B-7 lists the
78-15725-02