Atm Module Leds - Cisco Catalyst 6500 Series Installation Manual

Chapter 1 Product Overview

ATM Module LEDs

Table 1-7 ATM Module LEDs
LED Color/State Description
STATUS Green
Orange
Red
Off
TX (transmit) Green
RX (receive) Green
78-15725-02
The ATM module front-panel LEDs are described in
All diagnostics pass; the module is operational.
The module is booting or running diagnostics.
A fault occurred during the initialization sequence.
An overtemperature condition has occurred. (A minor temperature
threshold has been exceeded during environmental monitoring.)
The module is resetting. (The switch has just been powered on or the
module has been hot inserted.)
An overtemperature condition has occurred. (A major temperature
threshold has been exceeded during environmental monitoring.)
If the module fails to download code and configuration information
successfully during the initial reset, the LED stays red; the module does
not come online.
The module is not receiving power.
The port is transmitting a packet (the LED is lit for approximately
50 milliseconds).
The port is receiving a packet (the LED is lit for approximately
50 milliseconds).
Catalyst 6500 Series Switch Module Installation Guide
ATM Modules
Table 1-7.
1-51