Cisco Catalyst 6500 Series Installation Manual page 81

Chapter 1 Product Overview
Table 1-11 Multilayer Switch Module STATUS LED
Color/State
Green
Orange
Red
The CONSOLE PORT MODE switch allows you to connect a terminal to the
MSM using either a Catalyst 5000 family Supervisor Engine III console cable or
the console cable and adapters provided with the switch. You also can connect a
modem to the console port using the cable and adapter provided with the switch.
Use a paper clip or a small, pointed object to access the CONSOLE PORT MODE
Note
switch.
78-15725-02
Description
All diagnostics pass; the module is operational.
The module is booting or running diagnostics.
An overtemperature condition has occurred. (A minor temperature
threshold has been exceeded during environmental monitoring.)
A diagnostic test has failed; the module is not operational.
An overtemperature condition has occurred. (A major temperature
threshold has been exceeded during environmental monitoring.)
Catalyst 6500 Series Switch Module Installation Guide
Multilayer Switch Module (WS-X6302-MSM)
1-57