Ethernet Module Leds - Cisco Catalyst 6500 Series Installation Manual

Chapter 1 Product Overview

Ethernet Module LEDs

Table 1-6 Ethernet and Gigabit Ethernet Module LEDs
LED Color/State
STATUS Green
Orange
Red
Off
78-15725-02
The front panel LEDs are described in
The Ethernet and Gigabit Ethernet module front-panel LEDs are described in
Table 1-6.
Description
All diagnostics pass; the module is operational.
The module is booting or running diagnostics.
An overtemperature condition has occurred. (A minor temperature
threshold has been exceeded during environmental monitoring.)
The module is resetting. The switch has just been powered on or the
module has been hot inserted during the normal initialization
sequence.
An overtemperature condition has occurred. (A major temperature
threshold has been exceeded during environmental monitoring.)
If the module fails to download code and configuration information
successfully during the initial reset, the LED stays red; the module
does not come online.
The module is not receiving power.
Table 1-6 on page
Catalyst 6500 Series Switch Module Installation Guide
Ethernet Module LEDs
1-47.
1-47