Cisco Catalyst 6500 Series Installation Manual page 84

Network Analysis Modules
Figure 1-41 Network Analysis Module (WS-SVC-NAM-1)
WS-SVC-NAM-2
NETWORK ANALYSIS MODULE
STATUS LED
Catalyst 6500 Series Switch Module Installation Guide
1-60
Table 1-12 NAM-1 Module STATUS LED Description
Color/State Description
Green All diagnostic tests pass. The NAM is operational.
Red A diagnostic other than an individual port test
failed.
Orange Indicates one of three conditions:
Off The NAM is powered off.
The SHUTDOWN button is used to manually shut down the NAM. To prevent
corruption of the NAM, it is critical that the NAM run through the shutdown
procedure before shutting off. If the NAM fails to respond to CLI or NAM
shutdown commands, you can use the SHUTDOWN button as an alternative
shutdown method.
For information on NAM module hardware and software requirements and port
adapter installation and configuration, refer to the Catalyst 6500 Series Network
Analysis Module Installation and Configuration Note.
SHUTDOWN button
The NAM is running through its boot and
•
self-test diagnostic sequence.
The NAM is disabled.
•
The NAM is in the shutdown state.
•
Chapter 1 Product Overview
SHUTDOWN
78-15725-02