Cisco Catalyst 6500 Series Installation Manual page 105

Chapter 1 Product Overview
Figure 1-52 8-Port T1/E1 PSTN Interface Module (WS-X6608-T1/E1)
WS-6608-E1
1
8 PORT VOICE E1
Table 1-21 8-Port PSTN Interface Module LEDs
LED Color/State
STATUS Green
Orange
Red
Off
78-15725-02
2 3 4 5
The front panel LED operation is described in
Description
The module is operational. The supervisor engine has granted the
module online status.
The module is booting or running diagnostics.
The supervisor engine has disabled the module.
An overtemperature condition has occurred. (A minor temperature
threshold has been exceeded during environmental monitoring.)
The module is resetting. (The switch has just been powered on or the
module has been hot inserted.)
The module processor detected a fatal error during its diagnostics.
An overtemperature condition has occurred. (A major temperature
threshold has been exceeded during environmental monitoring.)
The module is not receiving power. The module was powered down
due to lack of power. (The module is listed as power-deny in the
show module status field.)
6 7
Table
Catalyst 6500 Series Switch Module Installation Guide
Voice-Related Modules
8
1-21.
1-81