Verifying Newly Installed Modules - Cisco Catalyst 6500 Series Installation Manual

Verifying the Installation

Verifying Newly Installed Modules

Console> show module
Mod Slot Ports Module-Type
--- ---- ----- ------------------------- ------------------- --- --------
1 1 2 1000BaseX Supervisor
15 1 1 Multilayer Switch Feature WS-F6K-MSFC
3 3 2 Network Analysis Module
5 5 48 10/100BaseTX Ethernet
Mod Module-Name
--- ------------------- -----------
1
15
3
5
Mod MAC-Address(es)
--- -------------------------------------- ------ ---------- -----------------
1 00-30-96-29-9f-84 to 00-30-96-29-9f-85 1.0
00-30-96-29-9f-86 to 00-30-96-29-9f-87
00-50-3e-8d-64-00 to 00-50-3e-8d-67-ff
15 00-d0-bc-ed-6b-2c to 00-d0-bc-ed-6b-6b 1.2
3 00-90-2b-00-a7-ca to 00-90-2b-00-a7-cb 0.201
5 00-50-f0-ac-30-54 to 00-50-f0-ac-30-83 1.0
Catalyst 6500 Series Switch Module Installation Guide
3-20
Enter the show module or show port [mod_num/port_num] command to verify
that the system acknowledges the new modules and has brought them online.
This example shows the output of the show module command:
Serial-Num
SAD03392376
SAD03366264
JAB0343055Y
SAD03181291
Model
WS-X6K-SUP1A-2GE
WS-X6380-NAM
WS-X6248-RJ-45
Hw Fw
5.2(1)
12.0(7T)XE 12.0(7T)XE1(2.07)
4B4LZ0XA
4.2(0.24)V 6.1(0.128)ORL
Chapter 3 Installing the Module
Sub Status
yes ok
no ok
no ok
no ok
Sw
6.1(0.128)ORL
1.1(0.20)
78-15725-02