Cisco Catalyst 6500 Series Installation Manual page 100

Voice-Related Modules
Note
Note
Figure 1-49 Communications Media Module (WS-SVC-CMM)
WS-SVC-CMM
WS-SVC-CMM-6E1
0 1 2
6-Port E1 Interface Port Adapter.
Communication Media Module
STATUS LED
Catalyst 6500 Series Switch Module Installation Guide
1-76
The Communications Media Module has a Gigabit Ethernet backplane interface
that can have one IP address and one MAC address.
The Communications Media Module requires a static IP address. Obtaining an IP
address through a DHCP server is not supported. You assign an IP address to the
Communications Media Module Gigabit Ethernet backplane interface through the
CLI using the interface GigabitEthernet1/0 command.
For an overview of a VoIP network using the Catalyst 6500 series switches, refer
to the "Configuring a VoIP Network" section of the Catalyst 6500 Series Switch
Software Configuration Guide at this URL:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_7_4/confg_gd
/voicecfg.htm
Interface Module slots
WS-SVC-CMM-6E1
3 4 5
0 1
6-Port E1 Interface Port Adapter.
Table 1-18 lists the supported features for the Communications Media Module
interface modules.
2 3 4 5
REAR MODULE STATUS LED
Chapter 1 Product Overview
78-15725-02