Fast Ethernet Module Connectors And Leds; Figure 2-5 8-Port Fast Ethernet Module Connectors And Leds - Cisco 11500 Series Hardware Installation Manual

Cabling the CSS 11503 and CSS 11506 Modules

Fast Ethernet Module Connectors and LEDs

Cisco 11500 Series Content Services Switch Hardware Installation Guide
2-14
The FEM is available in two models:
• Model CSS5-IOM-8FE contains 8 auto-sensing RJ-45 Fast Ethernet
10/100-Mbps 10BASE-T/100BASE-TX connectors.
• Model CSS5-IOM-16FE contains 16 auto-sensing RJ-45 Fast Ethernet
10/100-Mbps 10BASE-T/100BASE-TX connectors.
Each connector has Link and Duplex LEDs. The LEDs indicate the module and
network status. Figure 2-5
Figure 2-5 8-Port Fast Ethernet Module Connectors and LEDs
2
3
4
1
2
3
4
5
6
7
8
1
LI NK
DP LX
LI NK
DP LX
3
2
1
RJ-45 Ethernet
10BASE-T/100BASE-TX
connector 1 (connector 2 is
shown directly above it)
2
Link LED (on each connector)
3
Duplex LED (on each
connector)
Figure 2-6 illustrates the LEDs and connectors on the 16-port FEM.
illustrates the LEDs and connectors on the 8-port FEM.
5
6
4
RJ-45 Ethernet
10BASE-T/100BASE-TX connector
8 (connector 7 is shown directly
below it)
5
Spring-loaded screw (one of two)
6
Ejector (one of two)
Chapter 2 Cabling the CSS
78-13884-03