Control Registers Of Serial Interface Channel 1 - NEC mPD780208 Subseries User Manual

8-bit single-chip microcontrollers

Table of Contents

14.3 Control Registers of Serial Interface Channel 1

The following four registers are used to control serial interface channel 1.

• Timer clock select register 3 (TCL3)

• Serial operating mode register 1 (CSIM1)

• Automatic data transmit/receive control register (ADTC)

• Automatic data transmit/receive interval specification register (ADTI)

CHAPTER 14 SERIAL INTERFACE CHANNEL 1

User's Manual U11302EJ4V0UM