Follow Rest; Carriage & Slide Locks; Compound Rest - Grizzly G0791 Owner's Manual

Follow Rest

Tip: To reduce the effects of friction, lubricate the
finger rollers with way oil before operation.
Finger
Rollers
Figure 56. Follow rest attachment.
Carriage & Slide
Locks
The carriage, cross slide, and compound rest
have locks (see Figure 57) that can be tightened
to provide additional rigidity during operation.
Tools Needed
Hex Wrench 3mm .............................................. 1
Hex Wrench 6mm .............................................. 1

Compound Rest

Lock
Figure 57. Locations of compound rest, carriage,
and cross slide locks.
Model G0791 (Mfd. Since 9/15)
Cap
Screws
Qty
Carriage
Lock
Cross Slide
Lock
Compound Rest
The compound rest is used to move the tool
toward and away from the workpiece at the preset
angle of the compound rest. The base of the com-
pound rest has graduated scale used for setting
the cutting tool to a specific angle.
Graduated Dial
Increments ................................. 0.001" (0.05mm)
One Full Revolution ........................0.200" (5mm)
Tool Needed
Wrench 14mm ................................................... 1
To set compound rest at a certain angle:
1. Loosen two hex nuts at base of compound
rest (see Figure 58).
Hex Nuts
Angle
Scale
Figure 58. Location of angle scale and rotation
hex nuts on the compound rest.
Qty
-47-