Follow Rest; Compound Rest & Carriage Locks - Grizzly G0750GV Owner's Manual

Follow Rest

The follow rest mounts to the saddle with two
cap screws (see Figure 52). It is used on long,
slender parts to prevent workpiece deflection from
the pressure of the cutting tool during operation.
Adjust the follow rest fingers in the same manner
as the those on the steady rest.
Note: To reduce the effects of friction, lubricate
the rollers with way oil during operation.
Items Needed
Hex Wrench 8mm .............................................. 1
Open-End Wrench 10mm .................................. 1
Finger
Rollers
Cap
Screws
Figure 52. Follow rest attachment.
-42-
Compound Rest &
Carriage Locks
The compound rest and carriage have locks that
can be tightened to provide additional rigidity dur-
ing operation, especially during heavy cuts.
See Figure 53 to identify the locations of the
locks for each device.
Note: The cross slide does not have a locking
provision.
Qty
Items Needed
Hex Wrench 3mm .............................................. 1
Hex Wrench 6mm .............................................. 1
Compound
Rest Lock
Figure 53. Location of compound rest and
carriage locks.
Model G0750GV (Mfd. Since 03/18)
Qty
Carriage
Lock