Grizzly G0791 Owner's Manual page 51

Aligning Cutting Tool with Spindle
Centerline
Figure 61. Cutting tool aligned with spindle
centerline (viewed from tailstock).
Model G0791 (Mfd. Since 9/15)
Tools Needed
Hex Wrench 5mm .............................................. 1
Open-End Wrench/Socket 27mm ...................... 1
Steel Shims ....................................... As Needed
Cutting Tool ....................................................... 1
Fine Ruler .......................................................... 1
Tailstock Center ................................................. 1
Figure 62. Cutting tool aligned to the tailstock
center.
Qty
-49-