Grizzly G0791 Owner's Manual page 56

Figure 74 indicates that for a longitudinal feed
rate of 0.0096 in/rev., the alpha feed lever must
be set to "B", and the numeric feed lever set to "7"
(see Figure 75).
Alpha Feed Numeric Feed
Lever Set to B Lever Set to 7
Longitudinal
Feed Icon
Figure 74. Reading feed chart.
Alpha Lever
Set to B
Figure 75. Feed levers set to "B" and "7" for
0.0096 in/rev. longitudinal feed rate.
-54-
Feed Rate
.0096 in/rev.
Numeric Lever
Set to 7
How to Read Metric Threading Chart
Figure 76 indicates the gearbox lever and end
gear positions, and available pitches, for metric
threading.
End Gear
Positions
Figure 76. Location of gearbox lever and end
gear positions on metric threading chart.
Figure 77 shows how the gearing illustrations in
the thread chart relate to the end gears.
Figure 77. Power feed gearing setup.
Model G0791 (Mfd. Since 9/15)
Numeric
Lever
Positions
Metric
Thread
Pitches
Alpha
Lever
Positions