Table of Contents
Advertisement
WARNING!
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual, call
(800) 523-4777 or go to
www.grizzly.com.
WARNING!
IMPACT INJURY
1001
EYE/FACE INJURY
PINCH
HAZARD!
ENTANGLEMENT
HAZARD!
Remove chuck key
Always wear
HAZARD!
and all adjustment
ANSI-approved safety
Keep hands clear of
tools before
glasses and face shield
outboard spindle and
starting lathe.
when using this
rotating workpiece to
machine.
avoid serious injury.
63 x 38mm
WARNING!
IMPACT INJURY
ENTANGLEMENT
HAZARD!
HAZARD!
Tie back long hair, roll up
Avoid setting spindle
long sleeves, and remove
speed too fast for
loose clothing, jewelry, or
chuck RPM rating or
gloves to prevent getting
workpiece size/shape.
caught in moving parts.
This can cause
rotating parts to fly
loose and strike
1011
operator with great
force, resulting in
WARNING!
serious injury or
death!
PINCH
ENTANGLEMENT
38 x 123.5mm
HAZARD!
Disconnect power before
opening door. Stay clear
of rotating outboard
spindle.
G0791 Machine Labels B
63 x 38mm
• 1:1 Sizing (Labels are
actual size)
(12/05/14)
• Labels must be made of
17 x 19mm
oil-resistant material
COLOR CODES
PANTONE 101 C or RAL 2005
PANTONE 109 C
32 x 35.5mm
WARNING!
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
To reduce risk of death
FOR GRIZZLY MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
or serious injury, read
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
manual BEFORE using
artwork changes are required, contact us immediately at manuals@grizzly.com.
To get a new manual, call
(800) 523-4777 or go to
www.grizzly.com.
1012
WARNING!
IMPACT INJURY
EYE/FACE INJURY
PINCH
HAZARD!
HAZARD!
ENTANGLEMENT
Remove chuck key
HAZARD!
and all adjustment
ANSI-approved safety
Keep hands clear of
tools before
glasses and face shield
outboard spindle and
starting lathe.
when using this
rotating workpiece to
avoid serious injury.
WARNING!
63 x 38mm
IMPACT INJURY
ENTANGLEMENT
HAZARD!
HAZARD!
Tie back long hair, roll up
Avoid setting spindle
long sleeves, and remove
speed too fast for
loose clothing, jewelry, or
chuck RPM rating or
gloves to prevent getting
workpiece size/shape.
caught in moving parts.
This can cause
rotating parts to fly
loose and strike
operator with great
G0791 Machine Labels C
force, resulting in
HAZARD
WARNING!
AREA!
(12/05/14)
serious injury or
death!
• 1:1 Sizing (Labels are
PINCH
CAUTION
actual size)
ENTANGLEMENT
• Labels must be made of
38 x 123.5mm
HAZARD!
oil-resistant material
HAZARD
Disconnect power before
AREA!
279.5 x 42mm
305 x 25.5mm
opening door. Stay clear
of rotating outboard
CAUTION
spindle.
HAZARD
63 x 38mm
AREA!
CAUTION
CAUTION
PANTONE 109 C
HAZARD
AREA!
COLOR CODES
CAUTION
PANTONE 101 C or RAL 2005
HAZARD
AREA!
PANTONE 109 C
32 x 35.5mm
CAUTION
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
HAZARD
AREA!
FOR GRIZZLY MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
CHECK OIL
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
LEVEL BEFORE USING!
CAUTION
artwork changes are required, contact us immediately at manuals@grizzly.com.
HAZARD
AREA!
CAUTION
REFER TO
OWNER'S MANUAL
FOR OIL TYPE AND
HAZARD
AMOUNT.
AREA!
102 x 102mm
CAUTION
1016
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
If
artwork changes are required, contact us immediately at manuals@grizzly.com.
REF PART #
DESCRIPTION
1
P07910001
4-JAW INDEPENDENT CHUCK ASSY
1-1
P07910001-1 4-JAW INDEPENDENT CHUCK BODY 8"
1-2
P07910001-2 4-JAW CHUCK REVERSIBLE JAW
2
P07910002
FACEPLATE 10" D1-5
3
P07910003
BOTTLE FOR OIL
4
P07910004
TOOLBOX
6
P07910006
CHUCK WRENCH 4-JAW
7
P07910007
CHUCK WRENCH 3-JAW
9
P07910009
WRENCH 12 X 14MM OPEN-ENDS
10
P07910010
WRENCH 10 X 12MM OPEN-ENDS
11
P07910011
WRENCH 9 X 11MM OPEN-ENDS
12
P07910012
DRILL CHUCK B16 3-16MM
13
P07910013
DRILL CHUCK KEY 5/16" STD 11T SD-5/8"
14
P07910014
SCREWDRIVER PHILLIPS #2
15
P07910015
SCREWDRIVER FLAT #2
16
P07910016
HEX WRENCH 10MM
17
P07910017
HEX WRENCH 8MM
18
P07910018
HEX WRENCH 6MM
19
P07910019
HEX WRENCH 5MM
20
P07910020
HEX WRENCH 4MM
21
P07910021
HEX WRENCH 2MM
22
P07910022
SPIDER BOLT W/NUT M10-1.5 X 38
23
P07910023
LIVE CENTER MT#3
-118-
Machine Labels & Cosmetics
Specifications
WARNING!
Full Load Current: 8.5A
To reduce the risk of serious personal injury while using this machine:
Lathe Motor: 2 HP, 220V, 1-Ph, 60 Hz
1. Read and understand manual before operating.
Lathe Swing Over Bed: 12"
2. Always wear approved safety glasses AND a face shield.
Lathe Distance Between Centers: 36"
3. Only plug power cord into a grounded outlet.
Lathe Spindle Speeds: 70–1400 RPM
4. Avoid getting entangled in rotating parts—tie back long hair, roll
Lathe Spindle Taper: MT#5
up sleeves, and DO NOT wear loose clothing, gloves, or jewelry.
Spindle Bore: 1.57" (39.87mm)
5. Disconnect power before setting up, adjusting, or servicing.
Tailstock Taper: MT#3
6. Keep all guards and covers in place during operation.
Mill Motor: 3/4 HP, 220V, 1-Ph, 60 Hz
7. Rotate workpiece by hand to ensure clearance before starting lathe.
Max. Dist. Spindle to Work Table: 12"
8. Test each new workpiece setup for safe rotation; start with
Max. Dist. Spindle to Bed: 14-1/4"
slowest speed. Stand to side of lathe until safe rotation verified.
Mill Spindle Stroke: 2-1/4"
9. Never use hands to secure workpiece to table during operation—
Mill Spindle Taper: R-8
use clamps or a vise.
Mill Spindle Speeds: 250–2300 RPM
10. Avoid positioning hands where they could slip into rotating bits
Drawbar Size: 7/16"-20
or tooling.
Weight: 1345 lbs.
11. Always use proper feeds and speeds for operation and workpiece.
12. Always remove chuck keys and other tools before starting.
13. Never touch rotating lathe chuck or workpiece with hands,
or try to slow or stop mill spindle with hands or tools.
Date
14. Never leave machine running unattended.
15. DO NOT operate when tired or under influence of drugs or alcohol.
209.5 x 59.5mm
16. Do not expose to rain or use in wet locations.
S/N
1002
Mfd. for Grizzly in China
17. Prevent unauthorized use by children or untrained users.
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY!
Only trained personnel
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
should operate this machine.
artwork changes are required, contact us immediately at manuals@grizzly.com.
Fluid Capacities
If safe operation procedures
Component
Capacity
Type
are not clearly understood,
Headstock
3.5 qt.
Grizzly #T23963 or ISO 32 Equivalent
get additional training before
Gearbox
Grizzly #T23962 or ISO 68 Equivalent
using.
Apron
0.5 qt.
Grizzly #T23962 or ISO 68 Equivalent
51 x 77.5mm
31 x 98mm
COLOR CODES
WARNING
PANTONE 101 C or RAL 2005
PANTONE 711 C or RAL 3020
GRIZZLY LOGO RED
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
If
artwork changes are required, contact us immediately at manuals@grizzly.com.
If
G0791 Machine Labels A
(12/5/14)
WARNING!
Specifications
Full Load Current: 8.5A
To reduce the risk of serious personal injury while using this machine:
Lathe Motor: 2 HP, 220V, 1-Ph, 60 Hz
1. Read and understand manual before operating.
Lathe Swing Over Bed: 12"
2. Always wear approved safety glasses AND a face shield.
Lathe Distance Between Centers: 36"
3. Only plug power cord into a grounded outlet.
Lathe Spindle Speeds: 70–1400 RPM
4. Avoid getting entangled in rotating parts—tie back long hair, roll
Lathe Spindle Taper: MT#5
up sleeves, and DO NOT wear loose clothing, gloves, or jewelry.
Spindle Bore: 1.57" (39.87mm)
5. Disconnect power before setting up, adjusting, or servicing.
Tailstock Taper: MT#3
6. Keep all guards and covers in place during operation.
Mill Motor: 3/4 HP, 220V, 1-Ph, 60 Hz
7. Rotate workpiece by hand to ensure clearance before starting lathe.
Max. Dist. Spindle to Work Table: 12"
8. Test each new workpiece setup for safe rotation; start with
Max. Dist. Spindle to Bed: 14-1/4"
slowest speed. Stand to side of lathe until safe rotation verified.
Mill Spindle Stroke: 2-1/4"
9. Never use hands to secure workpiece to table during operation—
Mill Spindle Taper: R-8
use clamps or a vise.
Mill Spindle Speeds: 250–2300 RPM
10. Avoid positioning hands where they could slip into rotating bits
Drawbar Size: 7/16"-20
or tooling.
Weight: 1345 lbs.
11. Always use proper feeds and speeds for operation and workpiece.
12. Always remove chuck keys and other tools before starting.
13. Never touch rotating lathe chuck or workpiece with hands,
or try to slow or stop mill spindle with hands or tools.
Date
14. Never leave machine running unattended.
17 x 19mm
15. DO NOT operate when tired or under influence of drugs or alcohol.
16. Do not expose to rain or use in wet locations.
S/N
17. Prevent unauthorized use by children or untrained users.
Mfd. for Grizzly in China
Only trained personnel
1010
should operate this machine.
Fluid Capacities
If safe operation procedures
Component
Capacity
are not clearly understood,
If
Headstock
3.5 qt.
get additional training before
Gearbox
using.
Apron
0.5 qt.
51 x 77.5mm
COLOR CODES
WARNING
PANTONE 101 C or RAL 2005
GRIZZLY LOGO RED
PANTONE 711 C or RAL 3020
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
artwork changes are required, contact us immediately at manuals@grizzly.com.
1009
REF PART #
DESCRIPTION
24
P07910024
DEAD CENTER MT#3 CARBIDE TIPPED
25
P07910025
DEAD CENTER MT#3 HSS
26
P07910026
DRILL CHUCK ARBOR R-8/B16
27
P07910027
SPINDLE SLEEVE MT#5-MT#3
28
P07910028
QUICK-CHANGE TOOL HOLDER ASSY
29
P07910029
GEAR 45T
30
P07910030
GEAR 27T
Grizzly #T23962 or ISO 68 Equivalent
31
P07910031
GEAR 50T
32
P07910032
GEAR 26T
33
P07910033
GEAR 35T
34
P07910034
GEAR 60T
35
P07910035
TAILSTOCK WRENCH
36
P07910036
3-JAW CHUCK ASSY 6" D1-5 SCROLL
36-1 P07910036-1 3-JAW CHUCK TOP JAW SET
36-2 P07910036-2 3-JAW CHUCK BOTTOM JAW SET
36-3 P07910036-3 3-JAW CHUCK BODY 6"
40
P07910040
GEAR 36T
41
P07910041
CAMLOCK STUD D1-5
42
P07910042
CAP SCREW M8-1.25 X 16
43
P07910043
WRENCH 17 X 19MM OPEN-ENDS
44
P07910044
WRENCH 22 X 24MM OPEN-ENDS
45
P07910045
SPINDLE SLEEVE R8-MT#3
46
P07910046
SPINDLE SLEEVE MT#3-MT#2
CAUTION
WARNING!
To reduce risk of death
HAZARD
or serious injury, read
AREA!
manual BEFORE using
machine.
CHECK OIL
To get a new manual, call
LEVEL BEFORE USING!
(800) 523-4777 or go to
www.grizzly.com.
CAUTION
WARNING!
IMPACT INJURY
EYE/FACE INJURY
PINCH
HAZARD!
HAZARD!
HAZARD
ENTANGLEMENT
Remove chuck key
Always wear
HAZARD!
AREA!
and all adjustment
1003
ANSI-approved safety
Keep hands clear of
tools before
glasses and face shield
outboard spindle and
starting lathe.
when using this
rotating workpiece to
machine.
avoid serious injury.
CAUTION
REFER TO
WARNING!
63 x 38mm
OWNER'S MANUAL
IMPACT INJURY
ENTANGLEMENT
FOR OIL TYPE AND
HAZARD!
HAZARD!
HAZARD
Tie back long hair, roll up
Avoid setting spindle
long sleeves, and remove
AREA!
speed too fast for
loose clothing, jewelry, or
chuck RPM rating or
gloves to prevent getting
workpiece size/shape.
caught in moving parts.
This can cause
102 x 102mm
CAUTION
rotating parts to fly
loose and strike
operator with great
force, resulting in
WARNING!
serious injury or
death!
PINCH
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
AMOUNT.
ENTANGLEMENT
If
38 x 123.5mm
HAZARD!
Disconnect power before
127 x 63.5mm
opening door. Stay clear
of rotating outboard
spindle.
63 x 38mm
17 x 19mm
COLOR CODES
WARNING
PANTONE 101 C or RAL 2005
CAUTION
PANTONE 109 C
32 x 35.5mm
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
If
artwork changes are required, contact us immediately at manuals@grizzly.com.
• 1:1 Sizing (Labels are
actual size)
• Labels must be made of
oil-resistant material
100 x 155mm
Type
Grizzly #T23963 or ISO 32 Equivalent
Grizzly #T23962 or ISO 68 Equivalent
Grizzly #T23962 or ISO 68 Equivalent
31 x 98mm
If
G0791 Machine Labels B
(12/05/14)
EYE/FACE INJURY
PINCH
WARNING!
HAZARD!
ENTANGLEMENT
Always wear
HAZARD!
To reduce risk of death
ANSI-approved safety
Keep hands clear of
or serious injury, read
glasses and face shield
manual BEFORE using
outboard spindle and
machine.
when using this
rotating workpiece to
machine.
avoid serious injury.
To get a new manual, call
(800) 523-4777 or go to
www.grizzly.com.
WARNING!
63 x 38mm
ENTANGLEMENT
HAZARD!
Tie back long hair, roll up
long sleeves, and remove
loose clothing, jewelry, or
gloves to prevent getting
caught in moving parts.
WARNING!
PINCH
ENTANGLEMENT
HAZARD!
Disconnect power before
127 x 63.5mm
opening door. Stay clear
of rotating outboard
spindle.
63 x 38mm
COLOR CODES
WARNING
PANTONE 101 C or RAL 2005
CAUTION
PANTONE 109 C
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
artwork changes are required, contact us immediately at manuals@grizzly.com.
G0791 Machine Labels B
(12/05/14)
WARNING!
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual, call
(800) 523-4777 or go to
www.grizzly.com.
EYE/FACE INJURY
PINCH
HAZARD!
ENTANGLEMENT
Always wear
HAZARD!
ANSI-approved safety
Keep hands clear of
glasses and face shield
outboard spindle and
when using this
rotating workpiece to
machine.
avoid serious injury.
WARNING!
63 x 38mm
ENTANGLEMENT
HAZARD!
Tie back long hair, roll up
long sleeves, and remove
loose clothing, jewelry, or
gloves to prevent getting
caught in moving parts.
WARNING!
PINCH
ENTANGLEMENT
HAZARD!
Disconnect power before
127 x 63.5mm
opening door. Stay clear
of rotating outboard
spindle.
63 x 38mm
COLOR CODES
WARNING
PANTONE 151 C or RAL 2005
CAUTION
PANTONE 109 C
32 x 35.5mm
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
artwork changes are required, contact us immediately at manuals@grizzly.com.
FOR GRIZZLY MACHINES ONLY!
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
• 1:1 Sizing (Labels are
actual size)
• Labels must be made of
oil-resistant material
G0791 Machine Labels B
1008
WARNING!
IMPACT INJURY
(12/05/14)
HAZARD!
Remove chuck key
and all adjustment
tools before
starting lathe.
WARNING!
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
IMPACT INJURY
To get a new manual, call
(800) 523-4777 or go to
HAZARD!
www.grizzly.com.
Avoid setting spindle
speed too fast for
EYE/FACE INJURY
EYE/FACE INJURY
chuck RPM rating or
HAZARD!
HAZARD!
workpiece size/shape.
Always wear
Always wear
ANSI-approved safety
ANSI-approved safety
This can cause
glasses and face shield
glasses and face shield
when using this
when using this
rotating parts to fly
machine.
machine.
loose and strike
Apron
0.5 qt.
WARNING!
WARNING!
operator with great
ENTANGLEMENT
ENTANGLEMENT
force, resulting in
HAZARD!
HAZARD!
Tie back long hair, roll up
Tie back long hair, roll up
serious injury or
long sleeves, and remove
long sleeves, and remove
death!
loose clothing, jewelry, or
loose clothing, jewelry, or
gloves to prevent getting
gloves to prevent getting
caught in moving parts.
caught in moving parts.
38 x 123.5mm
Gearbox
Grizzly #T23962 or ISO 68 Equivalent
1015
127 x 63.5mm
127 x 63.5mm
17 x 19mm
COLOR CODES
COLOR CODES
WARNING
WARNING
PANTONE 101 C or RAL 2005
PANTONE 101 C or RAL 2005
CAUTION
CAUTION
PANTONE 109 C
PANTONE 109 C
32 x 35.5mm
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY!
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
G0791 Machine Labels B
artwork changes are required, contact us immediately at manuals@grizzly.com.
(12/05/14)
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual, call
If
(800) 523-4777 or go to
www.grizzly.com.
Model G0791 (Mfd. Since 9/15)
• 1:1 Sizing (Labels are
actual size)
• Labels must be made of
oil-resistant material
WARNING!
IMPACT INJURY
HAZARD!
Remove chuck key
and all adjustment
tools before
starting lathe.
IMPACT INJURY
WARNING!
To reduce risk of death
HAZARD!
or serious injury, read
manual BEFORE using
Avoid setting spindle
machine.
speed too fast for
To get a new manual, call
(800) 523-4777 or go to
chuck RPM rating or
www.grizzly.com.
workpiece size/shape.
WARNING!
This can cause
IMPACT INJURY
rotating parts to fly
PINCH
HAZARD!
EYE/FACE INJURY
loose and strike
HAZARD!
ENTANGLEMENT
Remove chuck key
Always wear
HAZARD!
and all adjustment
operator with great
ANSI-approved safety
Keep hands clear of
tools before
force, resulting in
glasses and face shield
outboard spindle and
starting lathe.
when using this
1004
rotating workpiece to
serious injury or
machine.
avoid serious injury.
death!
WARNING!
63 x 38mm
IMPACT INJURY
ENTANGLEMENT
38 x 123.5mm
HAZARD!
HAZARD!
Tie back long hair, roll up
Avoid setting spindle
long sleeves, and remove
speed too fast for
loose clothing, jewelry, or
chuck RPM rating or
gloves to prevent getting
workpiece size/shape.
caught in moving parts.
This can cause
rotating parts to fly
loose and strike
operator with great
force, resulting in
WARNING!
serious injury or
death!
PINCH
ENTANGLEMENT
38 x 123.5mm
HAZARD!
17 x 19mm
Disconnect power before
127 x 63.5mm
1005
opening door. Stay clear
of rotating outboard
spindle.
63 x 38mm
17 x 19mm
COLOR CODES
WARNING
PANTONE 101 C or RAL 2005
CAUTION
PANTONE 109 C
If
32 x 35.5mm
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
If
artwork changes are required, contact us immediately at manuals@grizzly.com.
1006
• 1:1 Sizing (Labels are
actual size)
• Labels must be made of
oil-resistant material
G0791 Machine Labels A
• 1:1 Sizing (Labels are
actual size)
(12/5/14)
• Labels must be made of
oil-resistant material
WARNING!
WARNING!
WARNING!
Specifications
IMPACT INJURY
IMPACT INJURY
PINCH
PINCH
HAZARD!
HAZARD!
Full Load Current: 8.5A
To reduce the risk of serious personal injury while using this machine:
ENTANGLEMENT
ENTANGLEMENT
Lathe Motor: 2 HP, 220V, 1-Ph, 60 Hz
Remove chuck key
Remove chuck key
1007
1. Read and understand manual before operating.
HAZARD!
HAZARD!
Lathe Swing Over Bed: 12"
and all adjustment
and all adjustment
2. Always wear approved safety glasses AND a face shield.
Keep hands clear of
Keep hands clear of
tools before
tools before
outboard spindle and
outboard spindle and
Lathe Distance Between Centers: 36"
3. Only plug power cord into a grounded outlet.
Lathe Spindle Speeds: 70–1400 RPM
starting lathe.
starting lathe.
4. Avoid getting entangled in rotating parts—tie back long hair, roll
rotating workpiece to
rotating workpiece to
avoid serious injury.
avoid serious injury.
Lathe Spindle Taper: MT#5
up sleeves, and DO NOT wear loose clothing, gloves, or jewelry.
Spindle Bore: 1.57" (39.87mm)
5. Disconnect power before setting up, adjusting, or servicing.
63 x 38mm
63 x 38mm
Tailstock Taper: MT#3
6. Keep all guards and covers in place during operation.
Mill Motor: 3/4 HP, 220V, 1-Ph, 60 Hz
IMPACT INJURY
IMPACT INJURY
7. Rotate workpiece by hand to ensure clearance before starting lathe.
Max. Dist. Spindle to Work Table: 12"
HAZARD!
HAZARD!
8. Test each new workpiece setup for safe rotation; start with
Max. Dist. Spindle to Bed: 14-1/4"
Avoid setting spindle
Avoid setting spindle
slowest speed. Stand to side of lathe until safe rotation verified.
Mill Spindle Stroke: 2-1/4"
9. Never use hands to secure workpiece to table during operation—
speed too fast for
speed too fast for
Mill Spindle Taper: R-8
use clamps or a vise.
chuck RPM rating or
chuck RPM rating or
Mill Spindle Speeds: 250–2300 RPM
10. Avoid positioning hands where they could slip into rotating bits
workpiece size/shape.
workpiece size/shape.
Drawbar Size: 7/16"-20
or tooling.
This can cause
This can cause
Weight: 1345 lbs.
rotating parts to fly
rotating parts to fly
11. Always use proper feeds and speeds for operation and workpiece.
12. Always remove chuck keys and other tools before starting.
loose and strike
loose and strike
13. Never touch rotating lathe chuck or workpiece with hands,
operator with great
operator with great
or try to slow or stop mill spindle with hands or tools.
force, resulting in
force, resulting in
Date
WARNING!
WARNING!
14. Never leave machine running unattended.
serious injury or
serious injury or
15. DO NOT operate when tired or under influence of drugs or alcohol.
death!
death!
PINCH
PINCH
16. Do not expose to rain or use in wet locations.
S/N
ENTANGLEMENT
ENTANGLEMENT
Mfd. for Grizzly in China
17. Prevent unauthorized use by children or untrained users.
38 x 123.5mm
38 x 123.5mm
HAZARD!
HAZARD!
1013
Disconnect power before
Disconnect power before
1014
110 x 155mm
opening door. Stay clear
opening door. Stay clear
of rotating outboard
of rotating outboard
spindle.
spindle.
Only trained personnel
63 x 38mm
63 x 38mm
should operate this machine.
Fluid Capacities
If safe operation procedures
17 x 19mm
17 x 19mm
Component
Capacity
Type
are not clearly understood,
3.5 qt.
Grizzly #T23963 or ISO 32 Equivalent
get additional training before
using.
32 x 35.5mm
32 x 35.5mm
Headstock
51 x 77.5mm
31 x 98mm
COLOR CODES
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WARNING
PANTONE 101 C or RAL 2005
If
• 1:1 Sizing (Labels are
PANTONE 711 C or RAL 3020
GRIZZLY LOGO RED
actual size)
• Labels must be made of
oil-resistant material
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
If
artwork changes are required, contact us immediately at manuals@grizzly.com.
WARNING!
1015
Advertisement
Table of Contents
