Table of Contents
Advertisement
follow Rest
the follow rest mounts to the saddle with two hex
bolts (see figure 61). it is used on long, slender
parts to prevent workpiece deflection from the
pressure of the cutting tool during operation.
adjust the follow rest fingers in the same manner
as the those on the steady rest.
Note: To reduce the effects of friction, lubricate
the finger tips with generous anti-sieze lubricant
during operation.
Tools Needed
open-End Wrench 24mm .................................. 1
Fingers
figure 61. Follow rest attachment.
Model G0746/G0749 (Mfg. Since 3/13)
Qty
hex
Bolts
carriage & Slide
Locks
the carriage, cross slide, and compound rest
have locks that can be tightened to provide addi-
tional rigidity during operation, especially during
heavy cuts.
see figures 62–63 to identify the locations of the
locks for each device.
Tools Needed
open-End Wrench 13mm .................................. 1
figure 62. location of carriage and cross slide
locks.
Compound rest
lock
figure 63. location of compound rest lock.
Qty
Carriage
lock
Cross slide
lock
-47-
Advertisement
Table of Contents
