Section 6: Accessories - Grizzly G0791 Owner's Manual

ACCESSORIES

SECTION 6: ACCESSORIES

T10556—Taper Attachment Kit for G0791
This taper attachment provides precision outside
and inside tapers up to 12" without having to off-
set the tailstock. Can be used without disengag-
ing the cross slide, allowing the taper attachment
to be functional at any time by simply tightening
the bed clamp bracket, and will not interfere with
other turning operations. This taper attachment
features scales at both ends, reading inches-of-
taper per foot and angle of taper. An adjustment
knob with fine threads achieves precise control
when setting tapers.
Figure 113. T10556 Taper Attachment Kit for
G0791.
-72-
T25250—58 pc. Clamping Kit 5/16"-18, 3/8"
T-Slot
Our Clamping Kits are among the best in the
world! All the blocks, bolts, nuts and hold-downs
are case hardened. Each clamping kit includes:
(24) studs (four studs each: 3", 4", 5", 6", 7", and
8" long), (6) step block pairs, (6) T-nuts, (6) flange
nuts, (4) coupling nuts, and (6) end hold-downs.
The Model T25250 set fits 3/8" T-slots and
includes 5/16"-18 studs. Racks can be bolted to
the wall or side of machine for easy access.
Figure 114. T25250 58 pc Clamping Kit 5/16"-
18, 3/8" T-Slot.
G5942—Extra Tool Holder For Quick Change
Tool Post
Set a variety of tool bits and drop in for a quick
change over.
Figure 115. G5942 Extra Tool Holder For Quick
Change Tool Post.
Model G0791 (Mfd. Since 9/15)