Grizzly G0791 Owner's Manual page 8

Carriage
M
U
T
Figure 2. Carriage controls.
M. Quick-Change Tool Post: Allows the opera-
tor to quickly load and unload tools.
N. Compound Rest Handwheel: Moves tool
toward or away from workpiece at the preset
angle of compound rest.
O. Carriage Lock Cap Screw: Secures car-
riage in place for greater rigidity.
P . Thread Dial: Indicates when to engage half
nut during inch threading operations.
Q. Spindle Lever: Starts, stops, and reverses
direction of spindle rotation.
R . Half Nut Lever: Engages/disengages half
nut for threading operations.
S. Apron Feed Selection Lever: Selects car-
riage or cross slide for power feed.
T. Carriage Handwheel: Moves carriage along
bed.
U. Cross Slide Handwheel: Moves tooling
toward or away from the workpiece.
V. Quill: Holds centers and tooling.
W. Quill Lock Lever: Secures quill in position.
X. Tailstock Lock Lever: Secures tailstock in
position along bedway.
-6-
N
O
P
Q
S
R
Tailstock
W
V
Figure 3. Tailstock controls.
Y. Quill Handwheel: Moves quill toward or
away from spindle.
Z. ⁄ " Square-Drive Lock-Down: Used with a
1
2
torque wrench for precise alignment of cen-
ters.
AA. Tailstock Offset Screw (1 of 2): Adjusts
tailstock offset left or right from spindle
centerline.
End Gears
End
Gears
Figure 4. End gears.
Configuring the end gears (shown in Figure 139)
controls the speed of the leadscrew for threading
or the feed rod for power feed operations.
Model G0791 (Mfd. Since 9/15)
Y
X
Z
AA