Configure The Network Settings; Network Setup Fields - Cisco 8832 Administration Manual

Configure the Network Settings

Note The Cisco IP Phone provides several methods to reset or restore option settings, if necessary.
Configure the Network Settings
Procedure
Step 1
Press Settings.
Step 2 Select Admin Settings > Network Setup > Ethernet setup.
Step 3 Set the fields as described in
After you set the fields, you may need to reboot the phone.

Network Setup Fields

The Network Setup menu contains fields and submenus for IPv4 and IPv6.
To change some of the fields, you need to turn DHCP off.
Table 5: Network Setup Menu
Entry
IPv4 setup
IPv6 setup
Host name
Domain name
Operational VLAN ID
Admin VLAN ID
Cisco IP Conference Phone 8832 Administration Guide for Cisco Unified Communications Manager
38
Network Setup Fields, on page
Type Default
Menu
Menu
String
String
Cisco IP Conference Phone Installation
38.
Description
See the "IPv4 Setup Submenu" table.
This option displays only when the mode
or in dual-stack mode.
See the "IPv6 Setup Submenu" table.
Host name of the phone. If using DHCP,
this name is automatically assigned.
Name of the Domain Name System
(DNS) domain in which the phone
resides.
To change this field, turn off DHCP.
Operational Virtual Local Area Network
(VLAN) that is configured on a Cisco
Catalyst switch in which the phone is a
member.
Auxiliary VLAN in which the phone is
a member.