Set Up The Phone From The Setup Menus - Cisco 8832 Administration Manual

Set Up the Phone from the Setup Menus

Procedure
Step 1
Step 2
Step 3
Set Up the Phone from the Setup Menus
The phone includes many configurable network settings that you may need to modify before the phone is
functional for your users. You can access these settings, and change some of them, through menus on the
phone.
The phone includes the following setup menus:
• Network Setup: Provides options for viewing and configuring a variety of network settings.
• Security Setup: Provides options for viewing and configuring a variety of security settings.
Note
You can control whether a phone has access to the Settings menu or to options on this menu. Use the Settings
Access field in the Cisco Unified Communications Manager Administration Phone Configuration window to
control access. The Settings Access field accepts these values:
• Enabled: Allows access to the Settings menu.
• Disabled: Prevents access to most entries in the Settings menu. The user can still access Settings > Status.
• Restricted: Allows access to the User Preferences and Status menu items and allows volume changes to
If you cannot access an option on the Admin Settings menu, check the Settings Access field.
You configure settings that are display-only on the phone in Cisco Unified Communications Manager
Administration.
Procedure
Step 1 Press Settings.
Step 2
Select Admin Settings.
Step 3 Enter password if required, then click Sign-In.
Cisco IP Conference Phone 8832 Administration Guide for Cisco Unified Communications Manager
36
Command or Action
Hold the * key while connecting the power to
the conference phone.
After the LED bar light turns ON green and
then OFF, you can release the * key.
The conference phone reboots from the backup
image.
• IPv4 Setup: This submenu provides additional network options.
• IPv6 Setup: This submenu provides additional network options.
be saved. Prevents access to other options on the Settings menu.
Cisco IP Conference Phone Installation
Purpose