Cisco Ip Conference Phone Customization; Custom Phone Ringtones; Set Up A Custom Phone Ring - Cisco 8832 Administration Manual

Cisco IP Conference Phone Customization

•
•

Custom Phone Ringtones

The Cisco IP Phone ships with two default ringtones that are implemented in hardware: Chirp1 and Chirp2.
Cisco Unified Communications Manager also provides a default set of additional phone ringtones that are
implemented in software as pulse code modulation (PCM) files. The PCM files, along with an XML file that
describes the ring list options that are available at your site, exist in the TFTP directory on each Cisco Unified
Communications Manager server.
Attention
All file names are case sensitive. If you use the wrong case for the file name, the phone will not apply your
changes.
For more information, see the "Custom Phone Rings and Backgrounds" chapter,
for Cisco Unified Communications
Related Topics

Set Up a Custom Phone Ring

Procedure
Step 1 Create a PCM file for each custom ring (one ring per file).
Ensure the PCM files comply with the format guidelines that are listed in the Custom Ring File Formats
section.
Step 2
Upload the new PCM files that you created to the Cisco TFTP server for each Cisco Unified Communications
Manager in your cluster.
For more information, see the documentation for your particular Cisco Unified Communications Manager
release.
Custom Phone Ringtones, on page 85
Customize the Dial Tone, on page 87
Cisco Unified Communications Manager
Cisco IP Conference Phone 8832 Administration Guide for Cisco Unified Communications Manager
C H A P T E R
Manager.
Documentation, on page 12
8
Feature Configuration Guide
85