Table of Contents
Advertisement
Your Phone
The following figure shows the PoE and PoE power cable power options.
Figure 1: Conference Phone Power Options
Connect to the Network
You need to connect the conference phone to the telephone network.
• Wired connection—The phone is plugged into the network using an Ethernet cable.
Activate and Sign In to Your Phone
You may need to activate or sign in to your phone. Activation happens once for your phone, and connects the
phone to the call control system. Your administrator gives you your sign-in and activation credentials.
Sign In to Your Phone
Before You Begin
Get your user ID and PIN or password from your administrator.
Procedure
Step 1
Enter your user ID in the User ID field.
Step 2
Enter your PIN or password in the PIN or Password field, then press Submit.
Sign In to Your Extension from Another Phone
You can use Cisco Extension Mobility to sign in to a different phone in your network and have it act the same
as your phone. After you sign in, the phone adopts your user profile, including your phone lines, features,
established services, and web-based settings. Your administrator sets you up for the Cisco Extension Mobility
service.
Before You Begin
Get your user ID and PIN from your administrator.
Connect to the Network
Cisco IP Conference Phone 7832 User Guide
3
Advertisement
Table of Contents
