Secure Conference Call Identification - Cisco 8832 Administration Manual

Secure Conference Call Identification

Note If the call is routed through non-IP call legs, for example, PSTN, the call may be nonsecure even though it is
encrypted within the IP network and has a lock icon associated with it.
In a secure call, a security tone plays at the beginning of a call to indicate that the other connected phone is
also receiving and transmitting secure audio. If your call connects to a nonsecure phone, the security tone
does not play.
Note Secure calling is supported between two phones. Secure conference, Cisco Extension Mobility, and shared
lines can be configured by a secure conference bridge.
When a phone is configured as secure (encrypted and trusted) in Cisco Unified Communications Manager, it
can be given a "protected" status. After that, if desired, the protected phone can be configured to play an
indication tone at the beginning of a call:
• Protected Device: To change the status of a secure phone to protected, check the Protected Device check
• Play Secure Indication Tone: To enable the protected phone to play a secure or nonsecure indication
Secure Conference Call Identification
You can initiate a secure conference call and monitor the security level of participants. A secure conference
call is established by using this process:
1. A user initiates the conference from a secure phone.
2. Cisco Unified Communications Manager assigns a secure conference bridge to the call.
3. As participants are added, Cisco Unified Communications Manager verifies the security mode of each
phone and maintains the secure level for the conference.
4. The phone displays the security level of the conference call. A secure conference displays the secure icon
Note Secure calling is supported between two phones. For protected phones, some features, such as conference
calling, shared lines, and Extension Mobility, are not available when secure calling is configured.
The following table provides information about changes to conference security levels depending on the initiator
phone security level, the security levels of participants, and the availability of secure conference bridges.
Cisco IP Conference Phone 8832 Administration Guide for Cisco Unified Communications Manager
74
box in the Phone Configuration window in Cisco Unified Communications Manager Administration
(Device > Phone).
tone, set the Play Secure Indication Tone setting to True. By default, Play Secure Indication Tone is set
to False. You set this option in Cisco Unified Communications Manager Administration (System >
Service Parameters). Select the server and then the Unified Communications Manager service. In the
Service Parameter Configuration window, select the option in the Feature - Secure Tone area. The default
is False.
to the right of Conference on the phone screen.
Cisco IP Conference Phone Administration