Install The Wireless Microphone Charging Cradle - Cisco 8832 Administration Manual

Cisco IP Conference Phone Installation
You can move the microphone and attached table mount to a different location on the table surface as needed.
Use care when moving to protect the unit.
Related Topics

Install the Wireless Microphone Charging Cradle

You use the charging cradle to charge the wireless microphone battery.
Procedure
Step 1
Plug the charging cradle power adapter into an electrical outlet.
Step 2 Plug one end of the USB-C cable to the charging cradle and the other end into the power adapter.
The following figure shows installation of a wireless microphone charging cradle.
Figure 11: Wireless Microphone Charging Cradle Installation
Related Topics
Wireless Expansion Microphone, on page 11
Install the Wireless Microphone Charging
Wireless Expansion Microphone, on page 11
Install the Wireless Expansion
Cisco IP Conference Phone 8832 Administration Guide for Cisco Unified Communications Manager
Cradle, on page 33
Microphones, on page 32
Install the Wireless Microphone Charging Cradle
33