Ucr 2008 Setup; Set Up Ucr 2008 In Common Device Configuration - Cisco 8832 Administration Manual

Cisco IP Conference Phone Administration
Step 4
Select Save.

UCR 2008 Setup

The parameters that support UCR 2008 reside in Cisco Unified Communications Manager Administration.
The following table describes the parameters and indicates the path to change the setting.
Table 16: UCR 2008 Parameter Location
Parameter
FIPS Mode
SSH Access
Web Access
System > Enterprise Phone Configuration
IP Addressing Mode
IP Addressing Mode Preference for Signaling

Set Up UCR 2008 in Common Device Configuration

Use this procedure to set the following UCR 2008 parameters:
• IP Addressing Mode
• IP Addressing Mode Preference for Signaling
Procedure
Step 1 In Cisco Unified Communications Manager Administration, choose Device > Device Settings > Common
Device Configuration.
Step 2 Set the IP Addressing Mode parameter.
Step 3
Set the IP Addressing Mode Preference for Signaling parameter.
Cisco IP Conference Phone 8832 Administration Guide for Cisco Unified Communications Manager
Administration Path
Device > Device Settings > Common Phone Profile
System > Enterprise Phone Configuration
Device > Phones
Device > Phone
Device > Device Settings > Common Phone Profile
Device > Phone
System > Enterprise Phone Configuration
Device > Device Settings > Common Phone Profile
Device > Device Settings > Common Device
Configuration
Device > Device Settings > Common Device
Configuration
UCR 2008 Setup
111