Installation
This chapter describes the installation of the node.
•
•
•
•
•
•
•
Tools and Test Equipment
The following tools and equipment are required for installation.
• Torque wrench capable of 5 to 12 ft-lbs (6.8 to 16.3 Nm)
• 4-inch to 6-inch extension for torque wrench
• 1/2-inch socket for strand clamp bolts and cover bolts
• 1/4-inch flat-blade screwdriver
• #2 Phillips-head screwdriver
• Long-nose pliers
• 1/2-inch deep-well socket for seizure connector
• True-RMS digital voltmeter (DVM)
• EXFO FOT 22AX optical power meter with adapters
• Optical connector cleaning supplies
• Optical connector microscope with appropriate adapters for your optical connectors
Cisco GS7000 Super High Output Intelligent Node Installation and Operation Guide
3
C H A P T E R
15