Node Fastener Torque Specifications; Node Housing Ports - Cisco GS7000 Installation And Operation Manual

Node Fastener Torque Specifications

Node Fastener Torque Specifications
Be sure to follow these torque specifications when assembling/mounting the node.
Fastener
Housing closure bolts
Test point port plugs
Housing plugs
Strand clamp mounting bracket bolts
Pedestal mounting bolts
Module securing screws
RF Amplifier assembly shoulder screws
(cross head screw)
Seizure nut
RF cable connector
Fiber optic cable connector

Node Housing Ports

The following illustration shows the location of available RF ports, fiber ports, and test points on the node
housing.
Cisco GS7000 Super High Output Intelligent Node Installation and Operation Guide
16
Torque Specification
5 to 12 ft-lbs
(6.8 to 16.3 Nm)
5 to 8 ft-lbs
(6.8 to 10.8 Nm)
5 to 8 ft-lbs
(6.8 to 10.8 Nm)
8 to 10 ft-lbs
(10.8 to 13.6 Nm)
25 to 30 in-lbs
(2.8 to 3.4 Nm)
18 to 20 in-lbs
(2.0 to 2.3 Nm)
2 to 5 ft-lbs
(2.7 to 6.8 Nm)
Per manufacturer instructions
20 to 25 ft-lbs
(27.1 to 33.9 Nm)
Installation
Illustration